Choate Ultimate Varmint Stock for Savage Short Action

Out of stock

Choate Ultimate Varmint Stock for Savage Short Action

The Ultimate Stock features a completely adjustable cheekpiece and buttpad for a perfect fit. A rear elevation screw, coupled with an angled forend, provides precise elevation adjustments. Includes flush mounted sling swivel studs on the left and right, front and rear.

The aluminum bedding block free-floats up to a 1-1/4" bull barrel while the 2-1/2" wide forearm provides a steady shot.

Length of pull is 13-1/4" and can be adjusted in 3/4", 1/2" or 1/4" increments using spacers (sold separately). The bottom of stock is heavily serrated behind pistol grip and has a fine elevation adjustment knob that is removable. Angled forend makes bi-pod legs less likely to snag when folded. Durable polymer construction with a lifetime guarantee. The weight of this stock is 4lbs.

Will not fit new Savage Rifles with bolt release in the trigger guard, or Savage rifles with detachable magazine. There will be an 3/16 gap under the safety on all the Savage Varmint, Tactical and Sniper stocks. The action should only touch on the V of the bedding block and back of the recoil lug. The gap at the back is normal for Savage actions when installed in these stocks.

Fits Models 10/11/12/16.

Here are some dimensions that might help you identify your receiver length. These are the distances between the two receiver screws: Savage short action 4.275 or 4.411, long action 5.062

(MEASURE YOUR HOLE SPACING BEFORE YOU ORDER A STOCK)If you have the new Savage Centerfeed Model 10, the receiver screw holes will be 4.411 inches apart, and you must use the 240603 "Centerfeed" Varmint Ultimate stock.

This 240604 stock is for 4.275 inch hole axis spacing only. Will not fit detachable magazine models


Write Your Own Review
You're reviewing:Choate Ultimate Varmint Stock for Savage Short Action
Your Rating